Please help!! stuck at robert moses

[israelcastro1989]

Hey guys iam having no luck starting the jeep, it been two days and too many trips to pepboys, i went to demo point and everything was fine, when i was leaving i got maby 100yds and the jeep stalled, and wouldnt start up again, the fuerl pump primes and the carb is getting fuel, the starter works and cranks but doesnt turn the jeep on, i just did the cap and rotor 2 months ago with all new wires , today i changed the coil and still nothing , then i changed the crank position sensor and still nada, i checked all the fuses and wires and everything seems to be ok, can anyone give me any ideas as to what is wrong

[Victim Of Pain]

Anyone get to you yet? I'm stuck in my office right now, but could be there by about 5:30 - 6:00...

[israelcastro1989]

yeah my jeep is still there, but iam at home in levittown, my friend with a trailor is going to take me out of there and to his shop. thanks for offering!

[Hummeron37s]

Are you getting spark? I know you changed cao, rotor and coil but did you check for spark?

[Bandit1]

make sure you have good solid connections at the coil and cap. also, check all your connections, could be a loose connection some where

[Pugulis]

I know it's been a few days. Hope you fixed it by now. But if you haven't; Disconnect the battery for 20 minutes (clear any faults the computer detected) then try starting it again.

[DoubleK]

yea pugulis is right, it worked for me on both my jeeps...

[israelcastro1989]

so it turned out to be that the ecu was bad and i had a bad connection at the tps, thanks guy for the help, sorry it took so long to respond