Parting 96 XJ Ford Dana 60s King Shocks 89 Drivetrain

[WAD357]

Well after alot of thinking Im goin to part out my XJ..96XJ Shell full stiffiners little bit of rot on the trunk floor Harness for a renix in it LCA mounts cut off some Dings and Dents nothing major no motor no trans $ Best Offer

79 Ford Dana 60 High Pinion King Pin 35 spline inners 30 spline outers 5:38 gears new bearings Ford LSD that works MINT locks up nicely. King pins were rebuilt with new bearings. Comes with heim Joint steering all 7/8" Ruff Stuff heims. Setup for a custom 3 link. All new brakes Calipers rotors pads and wheel studs hubs drilled to take a 9/16th stud. Looking to get $2000 with steering steering is 1.75x.250 DOM

01 Ford Dana 60 Semifloat rear 35 spline shafts 5:38 gears new bearings BOLT IN to an XJ comes with ruff stuff spring plates and u bolts. New pads rotors and calipers in good shape $1000

H2 Wheels with 36x13.50x17 IROKS Tires are hurtin wheels have some rock rash $300 obo

21 spline NP231 works mint $75

KING Resi Shocks 10" travel 18" collapes 28" EXT $400 for the pair

Motor and trans are blown but if you need parts off of them they are from an 89 XJ good manifolds throttle body etc.

FRONT BUMPER-SOLD
Anything else you see make an offerhttp://i830.photobucket.com/albums/zz228/JustAnotherNotch/294230_2325740909845_1439314025_2654941_2255047_n. jpghttp://i830.photobucket.com/albums/zz228/JustAnotherNotch/IMG_5165.jpghttp://i830.photobucket.com/albums/zz228/JustAnotherNotch/IMG_5154.jpg

[BigBlack]

Wow really I watch you build this thing on fb:faint:

[WAD357]

Ill build another when I can afford to I really cant afford it right now as It needs a drivetrain which will cost me at least 500 and tires and that alone is going to be 1200 so Ill part it out cut my losses build a mild streetable wheeler for cheap and buy a quad with the rest

[BigBlack]

If I had the cash I would take those rears

[WAD357]

Axles wheels tires and front bumper sold

[94YJ]

so dude... are you done with wheeling or what? i know i saw you wanted a atv, but are you done with the jeeps for now?

[WAD357]

Ill have a 94 XJ probably next week sometime to build a mild wheeler out of

[wb joe]

I got a 6.5 lift in my xj now going up to maybe a 8" setup ,would the king shocks work for my truck at the lift i am at?

[WAD357]

still got the rear bumper and t case 250 obo for the bumper 75 bucks for the t case