DFNP
08-23-2011, 10:56 PM
asking $250, negotiable.
email peirce316@gmail.com
Kicker Solo Baric S10L74 Woofer - 600 W RMS
with custom built ported box and Kenwood amp.
sub specs:
RMS (Continuous) Power: 600 Watts
Peak Power (Maximum): 1200 Watts
Impedance: 4 Ohm DVC
Sensitivity: 85.7 (dB 1w/1m)
Mounting Depth: 6 3/8, 16.2 (inch/cm).
amp specs:
two-channel car amplifier
150 watts RMS x 2 at 4 ohms (230 watts x 2 at 2 ohms)
460 watts RMS x 1 bridged output at 4 ohms (4 ohm stable in bridged mode)
high-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz
selectable bass boost (0-18 dB at 40 Hz)
cooling fan
MOSFET power supply
Tri-way capable (Tri-Way crossover required)
CEA-2006 compliant
preamp- and speaker-level inputs
preamp outputs
fuse rating: 40A x 1
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
15"W x 2-7/16"H x 11-5/16"D
box size:
16.75" deep x 12.5" tall x 28" wide.
http://www.jeepforum.com/forum/attachments/f128/263069d1312498875-kicker-solo-baric-l7-sub-amp-box-img_7586.jpghttp://www.jeepforum.com/forum/attachments/f128/263068d1312498875-kicker-solo-baric-l7-sub-amp-box-img_7585.jpg
http://www.jeepforum.com/forum/attachments/f128/263066d1312498875-kicker-solo-baric-l7-sub-amp-box-img_7583.jpg
email peirce316@gmail.com
Kicker Solo Baric S10L74 Woofer - 600 W RMS
with custom built ported box and Kenwood amp.
sub specs:
RMS (Continuous) Power: 600 Watts
Peak Power (Maximum): 1200 Watts
Impedance: 4 Ohm DVC
Sensitivity: 85.7 (dB 1w/1m)
Mounting Depth: 6 3/8, 16.2 (inch/cm).
amp specs:
two-channel car amplifier
150 watts RMS x 2 at 4 ohms (230 watts x 2 at 2 ohms)
460 watts RMS x 1 bridged output at 4 ohms (4 ohm stable in bridged mode)
high-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz
selectable bass boost (0-18 dB at 40 Hz)
cooling fan
MOSFET power supply
Tri-way capable (Tri-Way crossover required)
CEA-2006 compliant
preamp- and speaker-level inputs
preamp outputs
fuse rating: 40A x 1
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
15"W x 2-7/16"H x 11-5/16"D
box size:
16.75" deep x 12.5" tall x 28" wide.
http://www.jeepforum.com/forum/attachments/f128/263069d1312498875-kicker-solo-baric-l7-sub-amp-box-img_7586.jpghttp://www.jeepforum.com/forum/attachments/f128/263068d1312498875-kicker-solo-baric-l7-sub-amp-box-img_7585.jpg
http://www.jeepforum.com/forum/attachments/f128/263066d1312498875-kicker-solo-baric-l7-sub-amp-box-img_7583.jpg