1998 Cherokee Sport Classic XJ parting Out

[Goonies.nsd]

This is the shops truck that we are parting out. Its a 1998 Jeep Cherokee Classic Sport. 4.0 6 in line 6, AW4 tranny, NP231 transfer case. Front High Pinion Dana 30 and rear drum 8.25 Chrysler. I havent checked but pretty sure there 3:55 gears. Grey cloth interior. Gray Grizzly wheels 15 x 7s. Took a light nose shot so bad header panel and LF fender. Dont know the miles, the digital odometer is not working. Im parting this truck out for Bob my boss. But i am stealing some stuff for myself. Any nose pieces not trashed im taking and the front hooks. Truck does run and drive. 4x4 works but the truck has no title so we cant sell it as a whole. Email me with needs or stop by to check it out. My email is goonies.nsd@gmail.com Please dont PM me through OO because the mailbox fills to quickly. I will post more info after i look the truck over fully. Thanks.

http://i1088.photobucket.com/albums/i334/dochopper09/For%20sale%20items%20and%20build%20logs/100_0141.jpg
http://i1088.photobucket.com/albums/i334/dochopper09/For%20sale%20items%20and%20build%20logs/100_0142.jpg
http://i1088.photobucket.com/albums/i334/dochopper09/For%20sale%20items%20and%20build%20logs/100_0143.jpg
http://i1088.photobucket.com/albums/i334/dochopper09/For%20sale%20items%20and%20build%20logs/100_0144.jpg
http://i1088.photobucket.com/albums/i334/dochopper09/For%20sale%20items%20and%20build%20logs/100_0145.jpg

[tripleg]

how much for the starter

[Doxastic]

High pinion front you say.... I could be interested in that. Does it bolt directly into a ZJ? What kind of half-shafts does it have (U-joint or CV)?

[Goonies.nsd]

High pinion front you say.... I could be interested in that. Does it bolt directly into a ZJ? What kind of half-shafts does it have (U-joint or CV)?

I will check tomorrow. It will bolt rite in your ZJ. But the pinion length is the key. Some long some short. But 2 98s should be the same. I will look at it tomorrow. Regardless i could just add the front driveshaft to the deal.

Actually scratch that. the driveshafts would be diferent lengths in a 6 cyl and 8. but if the pinion depth is the same your good.

[Goonies.nsd]

Bumpetee bump bump. Gonna get a better look at this truck today and report back.

[orangecrush4u]

How much for the wheels?

[Goonies.nsd]

How much for the wheels?

Bob loves the rims and wants to buy a truck just so he can use the rims lol. But he said he will take $160. for the wheels with the tires. There 30x9.5s but only so so tread.

[Doxastic]

If I'm putting a 3.5" lift on the Jeep.... and going from a low pinion to a high pinion.... I shouldn't have to do anything to the front driveshaft, right? My current one should end up being the perfect length because both ends of the driveshaft are being elevated. The tcase side is being raised by the lift. And the axle side is being raised by the high pinion axle swap, and they're both about 4" higher...

So as long as the pinion length is right, I'm good. And I guess I could always change that.... idk...

Oh... and I guess the control arm brackets have to be in the right spot... and it needs to use the same spindle... but I think they're pretty much just swap&trade.

[Doxastic]

Man.... I wish that was the 242 tcase... oh well.

[Goonies.nsd]

OK bump........

Bob couldnt decide whether he wanted to part this or not and he took a good week to decide. I made it easy for him because i started stealing what i wanted LOL. OK its a 98 with a 4.0 / AW4 / NP231. Not sure the mileage because the digital read out is not working. Drivetrain is in good order. Motor runs good with all accessories working. Dana 30 high pinion front axle with 3:55s. Rear Chrysler 8.25 with 3:55s.

Parts i stole. nose parts like grill and lenses. Front tow hooks, side mirrors and probably gonna rob the fr and rr seats. and rear bumper. Console and shifter cable.

Parts of interest.

Trailer hitch, nice rims with crappy 30X9.5s, Good radiator, rite front fender, hood, both rear doors, front doors are good but some small dents at the bottom and the drivers door needs a window regulator but it does work. Good door panels, Headliner is OK but has 2 small spots starting to sag. RR tail light perfect, LR has small small crack but does not leak.

Bad parts, front header and bumper, Catalytic converter rattles,

Any interest email me at goonies.nsd@gmail.com
Gonna part this thing out over maybe 2 weeks and then it goes to Matt to get crushed LOL.

[evilpersona]

do you still have this truck? my friend just got a 96 cherokee and needs new rear leafs?

[Comanche717]

Does it have an overhead console? If so I want it!

[Goonies.nsd]

We still have it. Im kinda on a 4 day Vacation so havent pushed it because im not at work. But i do plan to take the axles out. But to be honest the time to salvage the springs may be cost prohibitive. But i will see how hard they are. No overhead console. Just a small 4x4 light setup. But up for grabs none the less.

[Hummeron37s]

Still want the toe hooks.. :)

[Goonies.nsd]

Still want the toe hooks.. :)

Mine..... LOL Already stole them for myself :P

[Goonies.nsd]

Giving this thing another bump. Back to a full week of work tomorrow so i will be tearin into this thing. I give it maybe 2 to 3 weeks and its scrap. So act fast. Alot of good parts. Hate to see them get shredded.

[tripleg]

remember front driveshaft, front pinion, starter are mine lol and gavin wants the stock air box from it so throw him a price

[Goonies.nsd]

Im on it Geoff. Post those pics from today on the pics section dammit. LOL

[tripleg]

i will when i get thm up it was my gfs cam and she has it so im waiting on her

[Gdogg97XJ]

I could use the ac compressor if u still have it my number is 6317413367. Just text me and let me know some prices. I def need these items

[Goonies.nsd]

OK pullin some parts tomorrow if i have the time. I have everyone on a list. So i wont forget ya. If you email me, which is best at goonies.nsd@gmail.com please post your OO name, real name and parts requested. I do have it on Craigs list so i am trying to keep them straight. Im giving better prices for OO members. So mention it. Thanks.

[Goonies.nsd]

Started pullin some parts and took some pics.

http://i1088.photobucket.com/albums/i334/dochopper09/For%20sale%20items%20and%20build%20logs/100_0303.jpg
http://i1088.photobucket.com/albums/i334/dochopper09/For%20sale%20items%20and%20build%20logs/100_0302.jpg
http://i1088.photobucket.com/albums/i334/dochopper09/For%20sale%20items%20and%20build%20logs/100_0305.jpg
http://i1088.photobucket.com/albums/i334/dochopper09/For%20sale%20items%20and%20build%20logs/100_0304.jpg
http://i1088.photobucket.com/albums/i334/dochopper09/For%20sale%20items%20and%20build%20logs/100_0306.jpg

Removed some parts for OO members. also took some parts i know wont go to waste.

...2 inch reciever trailer hitch. Rusty and needs a coat of paint but is not rotted ar anything....$40.
...tail lights....$20 each. $30 for the pair.
...realized all the doors are in pretty good shape accept the drivers has a little crease in the lower corne but not bad.
...Stock radiator but in great shape.

Started takin the rear rug out and rear seat for my 92. Gonna take all the rug and seats. Any internal trim anyone may need....ask now.

[Goonies.nsd]

Given this another bump. Some parts have sold off the truck.

SOLD>>>>>Including.....trailer hitch, right front fender.

AVAILABLE>>>>>Rims are still available, NP231 transfer case, both axles, Motor accessories like the alternator, power steering pump, and sensors.
Good radiator and A/C condenser. dash trim, some switches, air bags, interior trim. Grey interior.

[envoyedout]

i may be interested in tires if still available.

[Cybergrunt]

John's prolly had a dozen XJ's roll through since that last post, lol.

[envoyedout]

haha i need some used 31s with good tread left bad!

[Cybergrunt]

I've got two Grabbers but they would be better suited as spares. Plenty of rubber, some dry rot.

[envoyedout]

nah i need 4 matching with good tread left that i could use as dd. thanks tho.

[Goonies.nsd]

Yeah that truck went to Jeep heaven over a year ago. The tires we still have but there pretty much just good for holding air. And holding up my 93 YJ out back. Tires are useless to be honest. A few of the 98 XJ is living on in "short attention span". Like the tranny and other odds and ends LOL.

[envoyedout]

oh, well hey do me a favor if you could keep an eye out for a good set of 31s for me. it would be greatly appreciated. thanks